Nylon Cable Ties
Niuli Electric has more than 10 years of experience in designing and manufacturing cable ties, and materials are 100% fresh nylon PA imported from USA, which quality is far beyond the international standard. So far they have certified by UL, CE, ROHS, REACH, etc. And can stand for high and low temperature, flame retardant, UV resistant, good resistance to alkali, oil, grease, oil derivatives and chloride solvents. We can design, develop and manufacture cable ties of different sizes, types, performances, colors, materials, etc. according to your requests.
The nylon cable ties also call as plastic zip tie, wire tie wrap, nylon fasteners, tie straps. We have Self-locking, reusable (releasable), push mount, mountable head, In-line, metal insert, hook and loop and many other types, from small to big and short to long size, the length has 4 6 8 10 12 14 15 36 inch (100 150 200 300 350 380 920 1000 1200 1500mm), width has 2.5 3.6 4.8 7.6 9 12mm, strength is 18 40 50 120 175 250 LBS (8 18 22 55 80 110 KGS). Popular sizes have 2.5*100mm, 2.5*150mm, 3.6*150mm, 3.6*200mm, 3.6*300mm, 4.8*200mm, 4.8*300mm, 4.8*370mm, 4.8*430mm, 7.6*300mm, 7.6*380mm, 7.6*540mm, 9*600mm, 9*760mm, 9*920mm, 9*1020mm, 9*1200mm, 9*1450mm, etc. We have black, white, natural, yellow, blue, green, red, orange, brown, grey, orange, pink, purple and many other colors for chosen.
Nylon Cable Ties Fabrication By Features
1.Features: Super tensile strength, Anti-Acid, Anti-erosion, not easy to aging.
2.Material：UL Approved Nylon 66.
3.Flammability: UL 94V-2
4.Installation temperature：-10℃ to 85℃.
5.Working temperature：-40℃ to 85℃.
6.Color: Natural (white), Black, other colors are available as requested.
7.Certificates: UL, CE, RoHS, REACH, SGS
The cable tie is made from 100% raw material nylon PA66, environmentally friendly non-toxic, fire-retardant, and has high anti-aging ability and long service life strong endurance.Outdoor use of ordinary cable ties in the sun will cause aging and fracture and the outdoor service life of NLZD cable ties is at least 2-3 times that of ordinary cable ties. The surface of the cable ties and the lock is treated with smooth technology, no obvious burrs remain, safe and not hurting your hands and more comfortable. The internal analysis is thickened three teeth, the teeth are connected, the spaceis even and tight, and the strong bite force is achieved steadily.
1.Features: Double-sided teeth cable ties has teeth on both sides of the body, the buckle in the head and the other side both have anti-release teeth, make the tension strength of the cable tie increase by more than 20%. Super tensile strength, Anti-Acid, Anti-erosion, not easy to aging.
2.Material：UL Approved Nylon PA66 (INVISTA U4820L, DuPont 101L, ASCEND 21SPC, etc.) (Other materials can also be used upon request)
3.Flammability: UL 94V-2
4.Installation temperature：-10℃ to 85℃.
5.Working temperature：-40℃ to 85℃.
6.Color: Natural (white), Black, other colors are available as requested.
7.Certificates: UL, CE, RoHS, REACH, SGS
8.Customization: R&D team, OEM&ODM supported for products’ size, color and packaging type.
1.Features: can be installed and work well in very low temperature environment, not easy to break and get aging.
2.Material：UL Approved Nylon PA66 (INVISTA U4820L, DuPont 101L, ASCEND 21SPC, etc.) (Other materials can also be used upon request)
3.Flammability: UL 94V-2
4.Installation temperature：-20℃ to 85℃.
5.Working temperature：-50℃ to 85℃.
6.Color: Natural (white), Black, other colors are available as requested.
7.Certificates: UL, CE, RoHS, REACH, SGS
8.Customization: R&D team, OEM&ODM supported for products’ size, color and packaging type.
1.Features: Suitable for outdoor and indoor places exposed to ultraviolet radiation, not easy to aging.
2.Material: UL Approved Nylon 66,
3.Flammability: UL 94V-2
4.Installation temperature：-10℃ to 85℃.
5.Working temperature：-40℃ to 85℃.
6.Color: Natural (white), Black, other colors are available as requested.
7.Certificates: UL, CE, RoHS, REACH, SGS
1.Features: can be installed and work well in high temperature environment, not easy to aging.
2.Material：UL Approved Nylon 66,
3.Flammability: UL 94V-2
4.Installation temperature：-10℃ to 120℃.
5.Working temperature：-40℃ to 120℃.
6.Color: Natural (white), Black, other colors are available as requested.
7.Certificates: UL, CE, RoHS, REACH, SGS
1.Features: can be released for repeated use, not easy to aging.
2.Material: UL Approved Nylon 66
3.Flammability: UL 94V-2
4.Installation temperature：-10℃ to 85℃.
5.Working temperature：-40℃ to 85℃.
6.Color: Natural (white), Black, other colors are available as requested.
7.Certificates: UL, CE, RoHS, REACH, SGS
1.Features: Especially used in Heating Ventilation and Air Conditioning systems, Super tensile strength, Heat-resistance, Anti-Acid, Anti-erosion, not easy to aging.
2.Material: UL Approved Nylon 66.
3.Flammability: UL 94V-2.
4.Installation temperature：-10℃ to 85℃.
5.Working temperature：-40℃ to 85℃.
6.Color: Natural (white), Black, other colors are available as requested.
7.Certificates: UL, CE, RoHS, REACH, SGS.
1.Features: The hook and loop cable ties also called magic cable ties, velcro cable ties, which are Resusable, suitable for bundling LAN cable, signal line, powe line, can avoid the transmission rate effected by normal nylon cable tie when tightening too much.
2.Material：Hook Side is made of PP, Loop Side is made of Nylon.
3.Color: White, Black, Yellow, Green, Blue, Red, other colors and sizes are available as requested.
4.Certificates: CE, RoHS, REACH, SGS.
1.Features: Also calls naughty castle cable ties, in-line 180° entry, the gripping teeth faces outside instead of inside, there is no sharp edges when cut the ties, makes the ties perfect for children’s playground.
2.Material：UL Approved Nylon 66.
3.Flammability: UL 94V-2.
4.Installation temperature：-10℃ to 85℃.
5.Working temperature：-40℃ to 85℃.
6.Color: Natural (white), Black, other colors are available as requested.
7.Certificates: UL, CE, RoHS, REACH, SGS.
1.Features: The zip-tie Handcuffs like the connection of two cable ties, which can bind or fix two pipes or cables at the same time, also suitable for police or SWAT, security guard or where someone need to be restrained.
2.Material：UL Approved Nylon 66.
3.Flammability: UL 94V-2.
4.Installation temperature：-10℃ to 85℃.
5.Working temperature：-40℃ to 85℃.
6.Color: Natural (white), Black, other colors are available as requested.
7.Certificates: UL, CE, RoHS, REACH, SGS.
1.Material：UL Approved Nylon 66
2.Flammability: UL 94V-2
3.Features: Tensile strong, Anti-Acid, Anti-erosion, not easy to aging.
4.Installation temperature：-10℃ to 85℃.
5.Working temperature：-40℃ to 85℃.
6.Color: Any color can be produced as requested, according the sample, RGB or Pantone color.
7.Certificates: UL, CE, RoHS, REACH, SGS
Order Information Table
| MOQ | 1 piece for normal type |
| Sample | Free sample for normal type |
| Lead time | sample 1 day, bulk order 3-30 days according to order quantity |
| Trade terms | EXW, FCA, FOB, CIF, DDU, DDP |
| Transpor | Land, Sea, Express, Flight, Train, etc. |
| Payment | T/T, L/C, PayPal, Western Union, Alipay, Wechat, Cash, etc. |
Niuli in Brief
- China's National High-Tech Enterprise
- 15 years of cable ties production experience
- 10000 ㎡ factory area in Wenzhou
- 32 production lines to ensure ontime delivery
- 100+ front-line employees
- 15 million USD annual saless in year 2023
- Certified by UL, CE, ROHS, REACH, SGS, BSCI
- Export to 125 countries worldwide
- 1863 OEM projects completed
- Supplier for brand like MSS, CASIEL, C&C LIGHTING, GEBRO, STINDO, etc.
Production
Inspection
Package
Delivery
1. What is Hot runner injection systems
Hot runner systems are used in injection molds to inject molten plastic particles into the cavity of the mold. The hot runner mold is a new structure that heats the runners of the traditional mold or the three-plate mold, and does not need to take out the runners during each forming.
The hot runner is to keep the plastic in the runner and gate in a molten state by heating. Since there are heating rods and heating rings near or in the center of the runner, the entire runner from the nozzle outlet of the injection molding machine to the gate is in a high temperature state, so that the plastic in the runner keeps melting. Generally, it is not necessary to open the runner to take out the condensation When starting the machine again, it only needs to heat the runner to the required temperature. For this reason, the hot runner process is sometimes referred to as a hot manifold system, or as runnerless molding.
Advantage:
1. Save raw materials and reduce costs.
2. Shorten molding cycle and improve machine efficiency
3. Point gates can be used without using three-plate molds.
4. It can make the internal molecular structure of the product more stable and improve the mechanical properties.
5. Increase the degree of automation.
6. The number of products that can be injection molded at the same time (that is, the number of products per mold) is more, and the output is higher.
7. The quality of the injection molded parts of the multi-cavity mold is consistent.
8. Improve the surface aesthetics of injection molded products.
9. Smaller injection pressure can be used, which can effectively reduce the post-deformation of thin-walled products.
Disadvantage:
1. The mold structure is complex, the cost is high, and the maintenance cost is high.
2. It takes longer time for the process to be stable after starting up, resulting in more waste products at the beginning.
Niuli Electric uses newly automatic hot runner injection molding system, specializing in the production of nylon cable ties, welcome to inquire and cooperate.
